Submit a Paper

Propose a Workshop

The Fifth International Conference on Advances in System Testing and Validation Lifecycle

VALID 2013
October 27 - November 1, 2013 - Venice, Italy


Call for Papers

Complex distributed systems with heterogeneous interconnections operating at different speeds and based on various nano- and micro-technologies raise serious problems of testing, diagnosing, and debugging.  Despite current solutions, virtualization and abstraction for large scale systems provide less visibility for vulnerability discovery and resolution, and make testing tedious, sometimes unsuccessful, if not properly thought from the design phase.

The conference on advances in system testing and validation considers the concepts, methodologies, and solutions dealing with designing robust and available systems. Its target covers aspects related to debugging and defects, vulnerability discovery, diagnosis, and testing.

The conference VALID 2013 continues a series of events focusing on designing robust components and systems with testability for varia features of behavior and interconnection. The conference will provide a forum where researchers shall be able to present recent research results and new research problems and directions related to them. The conference seeks contributions presenting novel result and future research in all aspects of robust design methodologies, vulnerability discovery and resolution, diagnosis, debugging, and testing.

We solicit both academic, research, and industrial contributions. We welcome technical papers presenting research and practical results, position papers addressing the pros and cons of specific proposals, such as those being discussed in the standard fora or in industry consortia, survey papers addressing the key problems and solutions on any of the above topics short papers on work in progress, and panel proposals.

Industrial presentations are not subject to the format and content constraints of regular submissions. We expect short and long presentations that express industrial position and status.

Tutorials on specific related topics and panels on challenging areas are encouraged.

The topics suggested by the conference can be discussed in term of concepts, state of the art, research, standards, implementations, running experiments, applications, and industrial case studies. Authors are invited to submit complete unpublished papers, which are not under review in any other conference or journal in the following, but not limited to, topic areas.

All topics and submission formats are open to both research and industry contributions.

Robust design methodologies
Designing methodologies for robust systems
Secure software techniques
Industrial real-time software
Defect avoidance
Cost models for robust systems
Design for testability
Design for reliability and variability
Design for adaptation and resilience
Design for fault-tolerance and fast recovery
Design for manufacturability, yield and reliability
Design for testability in the context of model-driven engineering

Vulnerability discovery and resolution
Vulnerability assessment
On-line error detection
Vulnerabilities in hardware security
Self-calibration
Alternative inspections
Non-intrusive vulnerability discovery methods
Embedded malware detection

Defects and Debugging
Debugging techniques
Component debug
System debug
Software debug
Hardware debug
System debug
Power-ground defects
Full-open defects in interconnecting lines
Physical defects in memories and microprocessors
Zero-defect principles

Diagnosis
Diagnosis techniques
Advances in silicon debug and diagnosis
Error diagnosis
History-based diagnosis
Multiple-defect diagnosis
Optical diagnostics
Testability and diagnosability
Diagnosis and testing in mo bile environments

System and feature testing
Test strategy for systems-in-package
Testing embedded systems
Testing high-speed systems
Testing delay and performance
Testing communication traffic and QoS/SLA metrics
Testing robustness
Software testing
Hardware testing
Supply-chain testing
Memory testing
Microprocessor testing
Mixed-signal production test
Testing multi-voltage domains
Interconnection and compatibility testing
SAT procedures for application to testing and formal verification

Testing techniques and mechanisms
Fundamentals for digital and analog testing
Emerging testing methodologies
Engineering test coverage
Designing testing suites
Statistical testing
Functional testing
Parametric testing
Defect- and data-driven testing
Automated testing
Embedded testing
Autonomous self-testing
Low cost testing
Optimized testing
Testing systems and devices
Test standards

Testing of wireless communications systems
Testing of mobile wireless communication systems
Testing of wireless sensor networks
Testing of radio-frequency identification systems
Testing of ad-hoc networks
Testing methods for emerging standards
Hardware-based prototyping of wireless communication systems
Physical layer performance verification
On-chip testing of wireless communication systems
Modeling and simulation of wireless channels
Noise characterization and validation
Case studies and industrial applications of test instruments

Software verification and validation
High-speed interface verification and fault-analysis
Software testing theory and practice
Model-based testing
Verification metrics
Service/application specific testing
Model checking
OO software testing
Testing embedded software
Quality assurance
Empirical studies for verification and validation
Software inspection techniques
Software testing tools
New approaches for software reliability verification and validation

Quality-assessment of software architectures and legacy systems
Quality-Assessment of Software Architectures and Legacy systems
Quality-assessment of software architectures
Validation and verification of software architecture
Automatic analysis of legacy code
Strategies for isolating legacy code and improving the design quality
Metrics for evaluating architectural quality characteristics
Tools for quality assessments of software architectures
Techniques and tools for testing legacy systems

Testing and validation of run-time evolving systems
Automated testing for run-time evolving systems
Testing and validation of evolving systems
Testing and validation of self-controlled systems
Testing compile-time versus run-time dependency for evolving systems
On-line validation and testing of evolving at run-time systems
Modeling for testability of evolving at run-time systems
Near real-time and real-time monitoring of run-time evolving systems
Verification and validation of reflective models for testing
Verification and validation of fault tolerance in run-time evolving systems

Feature-oriented testing
Testing user interfaces and user-driven features
Privacy testing
Ontology accuracy testing
Testing semantic matching
Testing certification processes
Testing authentication mechanisms
Testing biometrics methodologies and mechanisms
Testing cross-nation systems
Testing system interoperability
Testing system safety
Testing system robustness
Testing temporal constraints
Testing transaction-based properties
Directed energy test capabilities /microwave, laser, etc./
Testing delay and latency metrics;

Domain-oriented testing
Testing autonomic and autonomous systems
Testing intrusion prevention systems
Firewall testing
Information assurance testing
Testing social network systems
Testing recommender systems
Testing biometric systems
Testing diagnostic systems
Testing on-line systems
Testing financial systems
Testing life threatening systems
Testing emergency systems
Testing sensor-based systems
Testing testing systems

 

INSTRUCTION FOR THE AUTHORS

Authors of selected papers will be invited to submit extended versions to one of the IARIA Journals.

Publisher: XPS (Xpert Publishing Services)
Archived: ThinkMindTM Digital Library (free access)
Prints available at Curran Associates, Inc.
Articles will be submitted to appropriate indexes.

Important deadlines:

Submission (full paper) May 28, 2013 June 20, 2013
Notification July 29, 2013
Registration August 15 , 2013
Camera ready August 22 , 2013

Only .pdf or .doc files will be accepted for paper submission. All received submissions will be acknowledged via an automated system.

Regular Papers (up to 6-10 page article)

Final author manuscripts will be 8.5" x 11", not exceeding 6 pages; max 4 extra pages allowed at additional cost. The formatting instructions can be found on the Instructions page. Helpful information for paper formatting can be found on the here.

Your paper should also comply with the additional editorial rules.

Once you receive the notification of paper acceptance, you will be provided by the publisher an online author kit with all the steps an author needs to follow to submit the final version. The author kits URL will be included in the letter of acceptance.

We would recommend that you not use too many extra pages, even if you can afford the extra fees. No more than 2 papers per event are recommended, as each paper must be separately registered and paid for. At least one author of each accepted paper must register to ensure that the paper will be included in the conference proceedings.

Work in Progress (short paper up to 4 pages long)

Work-in-progress contributions are welcome. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the contribution type as work in progress.  Authors should submit a four-page (maximum) text manuscript in IEEE double-column format including the authors' names, affiliations, email contacts. Contributors must follow the conference deadlines, describing early research and novel skeleton ideas in the areas of the conference topics. The work will be published in the conference proceedings.

For more details, see the Work in Progress explanation page

Posters (poster or collection of 6 to 8 slides)

Posters are intended for ongoing research projects, concrete realizations, or industrial applications/projects presentations. Acceptance will be decided based on a 1-2 page abstract and/or 6-8 .pdf slide deck submitted through the conference submission website. The poster may be presented during sessions reserved for posters, or mixed with presentation of articles of similar topic. The slides must have comprehensive comments. One big Poster and/or the associated slides should be used for discussions, once on the conference site.

For more details, see the Posters explanation page.

Ideas (2 page proposal of novel idea)

This category is dedicated to new ideas in their early stage. Contributions might refer to PhD dissertation, testing new approaches, provocative and innovative ideas, out-of-the-box, and out-of-the-book thinking, etc. Acceptance will be decided based on a maximum 2 page submission through the conference submission website. The contributions for Ideas will be presented in special sessions, where more debate is intended. The Idea contribution must be comprehensive, focused, very well supported (details might miss, obviously). A 6-8 slide deck should be used for discussions, once on the conference site.

For more details, see the Ideas explanation page.

Technical marketing/industrial/business/positioning presentations

The conference initiates a series of business, technical marketing, and positioning presentations on the same topics. Speakers must submit a 10-12 slide deck presentations with substantial notes accompanying the slides, in the .ppt format (.pdf-ed). The slide deck will not be published in the conference’s CD Proceedings. Presentations' slide decks will be posted on the IARIA's site. Please send your presentations to petre@iaria.org.

Tutorials

Tutorials provide overviews of current high interest topics. Proposals should be for three hour tutorials. Proposals must contain the title, the summary of the content, and the biography of the presenter(s). The tutorials' slide decks will be posted on the IARIA's site. Please send your proposals to petre@iaria.org

Panel proposals

The organizers encourage scientists and industry leaders to organize dedicated panels dealing with controversial and challenging topics and paradigms. Panel moderators are asked to identify their guests and manage that their appropriate talk supports timely reach our deadlines. Moderators must specifically submit an official proposal, indicating their background, panelist names, their affiliation, the topic of the panel, as well as short biographies. The panel's slide deck will be posted on the IARIA's site.

For more information, petre@iaria.org

Workshop proposals

We welcome workshop proposals on issues complementary to the topics of this conference. Your requests should be forwarded to petre@iaria.org.

 
 

Copyright (c) 2006-2013, IARIA